Mig vs Tig Welding Aluminum – Ultimate Difference Comparison

Well, we are going to write about the differences between MIG and TIG Welding Aluminum. Which welding process is the best? Really, this is a tough question not for me but also for many experts. Actually, both of them good at their point and flexibility issues. They are good at the different point of views based on the tasks you want to do with them. Here we are trying to solve the MIG vs TIG welding aluminum issues. Before that;

Mig vs Tig Welding

MIG vs TIG welding aluminum some basic differences between them.

• The major difference between MIG welding and TIG welding is their process of work. The MIG process by feeding continuously feeding wire, while the TIG requires a long welding rod to process slowing feeding.
• The MIG welding process doesn’t require hard labor, while the TIG welding process is harder to complete.
• MIG stands for Metal inert Gas while the TIG stands for Tungsten Inert Gas.
• The MIG process is done by feeding spool continuously of welding wire. It burns, melts and then fuses both the parent metals and the base metals together. It can weld regular steel or stainless steel and aluminum. The MIG is also able to weld from thin metal sheet to heavier metal plates. On the other side, the TIG is very good for thinner gauge materials such as kitchen sink and aluminum.
• The MIG is more flexible to handle while the TIG requires extra effort and much knowledge of welding.
• The MIG welding process is faster than the TIG welding process.
• A beginner can manage a MIG welding machine rather than using a TIG welding machine.
• The MIG welding process involves heating the mother metal first then goes to heat the base metal.

On the other hand, the TIG welding process involves heating the bass metal first then heat the mother metal.
These are the basic differences between a MIG Welder and a TIG Welder Machine. Though both of them support steel and aluminum, which is one good will be understood after reading the below paragraph of this article.
The Ultimate difference comparison of MIG and TIG welding.

While it is about the Aluminum welding process, you just need to handle the dirt properly and also need to avoid producing more brittle in the joint. Though the MIG can perform both of the tasks, it is a little bit lower at precision issues. The TIG will go ahead in this section. The TIG has the ability to create less brittle into the weld joint. So, the TIG is the ideal selection for aluminum welding.

What is more?

Let’s go into deeper into the welding process on an aluminum base. The TIG welder set the torch charged negatively and the set the base metal charged positively. Since the polarity is reversed it can clean up in a proper manner. The TIG uses AC current which causes the polarity switching rapidly and constantly. As a result, a single TIG welder is able to handle both welding and cleaning process combined. So, if you want a quality weld joint, you should consider a TIG welder.

The advanced types of TIG welders have the ability to adjust the AC process. If you lengthen the wavelength of positive grounding, you can complete your work faster. If you lengthen the wavelength of negative grounding, you can boost the cleaning process.

Final Lines:

If you think about more precise work on aluminum, you must consider using a TIG welder. So, when it is about MIG vs TIG Welding Aluminium-ultimate different comparison, I will go on the MIG welder’s side.

Click Here to Leave a Comment Below 0 comments